Overview
- Dual AMD® Opteron™ Support, (Dual Core Ready) 1000 MHz HyperTransport Link
- Up to 16GB DDR 400 SDRAM (or) Up to 16GB DDR 333 SDRAM (or) Up to 32GB DDR 266 SDRAM
- 2 x 64-bit 133/100MHz PCI-X Slots (1x Full-height/Half-length, 1x Low-profile/Half-length)
- 1 x Broadcom® 5704 Dual Port Gigabit Ethernet Controller
- Zero Channel RAID Support
- 4 x 3.5" SATA Hot-swap Drive Bays
- 500W Cold-swap Power Supply
- IPMI 2.0 Support + 3rd LAN Support
Technical Specification
|
| AS-1020A-T | - A+ Server 1020A-T (Beige)
| | AS-1020A-TB | - A+ Server 1020A-TB (Black)
| | | |
H8DAR-T | | | |
| CPU | - Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
- VRM x4
| | Chipset | - HyperTransport Link
- AMD 8132 HyperTransport PCI-X Tunnel
- AMD 8111 HyperTransport I/O Hub
| | | |
| Memory Capacity | - Eight 184-pin DIMM sockets
- Supports up to 16 GB DDR 400 MHz memory or
- Supports up to 16 GB DDR 333 MHz memory or
- Supports up to 32 GB DDR 266 MHz memory
- Single or Dual(recommended) channel memory
- For Single CPU: Memory must be populated in the adjacent memory bank
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
| | Memory Type | - DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB**
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | |
| SATA | - Marvell 88SX6041 Controller
- 4-Port SATA
- Host RAID 0, 1, JBOD
| | Zero Channel RAID | - Support for Zero-Channel RAID
- (Card not included)
| | IPMI | | | Network Controllers | - Broadcom® 5704 Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | VGA | - ATI Rage XL 8MB PCI Graphics Controller
| | | |
| PCI-X | - 2x 64-bit 133/100MHz PCI-X (3.3V) slots
- (One slot for Full-height / Half-length cards, one slot for Low-profile / Half-length cards)
| | | |
| Serial ATA | - Four Serial ATA connectors
- Four SATA hard drives supported
| | IDE | - Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices
| | Floppy | - 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support
| | LAN | | | USB | - FUCI
- Up to 5 USB Ports 1.1 Compliant
| | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 2 Fast UART 16550 serial ports
| | | |
| BIOS Type | - 4Mb Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
| |
| Form Factor | | | Model | | | | |
| Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
| | Ports | | | | |
| Hotswap | - 4 x 3.5" hot-swap SATA Drive Bays with SAF-TE
| | | |
| Floppy | - TEAC 3.5" 1.44MB Slim Floppy Drive
| | CD-ROM | - TEAC Slim 24x CD-ROM drive
| | | |
| 4 x 3.5" SATA HDD Backplane | | | |
| Fans | - 4x 9cm 10,200 RPM cooling fans
| | | |
| Cold-swappable 500W AC power supply module with PFC | | AC Voltage | - 100 - 240V, 60-50Hz, 10 Amp Max
| | DC Output | | | +5V | | | +5V standby | | | +12Vall | | | -12V | | | +3.3V | | | | |
| Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III - Watch Dog
| | Power Configurations | - ACPI/API Power Management
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | | |
| CPU | - Monitors CPU Core Voltages, +3.3V, +5V, ±12V & battery voltage
- Up to 5 fan status
- Supports System Management Utility
| | FAN | - Total up to 5-fan status
- 3-pin fan speed control
| | Temperature | - Monitoring for CPU, chassis, environment
| | LED | | | Other Features | |
|
Request Systems Quote
