Overview
- Dual AMD Opteron™ 200 Series Processors
- Up to 32GB DDR 200 SDRAM (or) Up to 32GB DDR 333 SDRAM (or) Up to 16GB DDR 400 SDRAM
- 1 64-bit 133MHz Low-Profile PCI-X Slot (or PCI-E x8 Slot) 1 64-bit 100MHz Full-height / Half-length PCI-X Slot (or PCI-E x8)
- Dual-port Gigabit ServerWorks HT2000 LAN/Ethernet Controller
- Zero Channel RAID Support
- 4 x 3.5" Ultra320 SCSI Hot-swap Drive Bays
- 500W Cold-swap Power Supply
Technical Specification
|
AS-1020S-8 | - A+ Server 1020S-8 (Beige)
| AS-1020S-8B | - A+ Server 1020S-8B (Black)
| | |
H8DSR-8 | | |
CPU | - Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
- 1MB Cache
- VRM x3
| Chipset | - ServerWorks HT2000
- ServerWorks HT1000
| | |
Memory Capacity | - Eight 184-pin DIMM sockets
- Supports up to 16 GB DDR 400 MHz memory or
- Supports up to 32 GB DDR 333 MHz memory or
- Supports up to 32 GB DDR 266 MHz memory
- Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in the adjacent memory bank
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
| Memory Type | - DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
| DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB**
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | |
IDE | - Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA/100
| SCSI | - Adaptec AIC-7902W Controller
- Dual-Channel Ultra320 SCSI with Host RAID
- Host RAID 0, 1, 10, JBOD
| Zero Channel RAID | - Support for Zero-Channel RAID
| IPMI | | Network Controllers | - ServerWorks® HT2000 Dual Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| VGA | - ATI Rage XL 8MB PCI Graphics Controller
- VGA Port
| Super I/O | | Clock Generator | | | |
PCI-Express | - 2 PCI-e x8 slots (Optional with PCI-e Riser Card)
| PCI-X | - 1 64-bit 133MHz PCI-X (3.3V) slot
(Low-Profile) - 1 64-bit 100MHz PCI-X (3.3V) slot
(Full-height / Full-length)
| IPMI | | | |
SCSI | - 2-Channel Ultra320 SCSI
- AIC7902 SCSI Controller
- SCSI ZCR Support
| Floppy | | LAN | | USB | - FUCI
- 2 USB Rear Ports
- 2 USB Internal Headers
- USB 2.0 Compliant, 1.1 Compatible
| Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 1 Fast UART 16550 serial ports
- 1 Header
| |
Form Factor | | Model | | | |
Height | | Width | | Depth | | Gross Weight | | Available Colors | | | |
Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
| Ports | | | |
Hotswap | - 4 x 3.5" hot-swap SCSI Drive Bays with SAF-TE
| | |
Floppy | - 3.5" 1.44MB Slim Floppy Drive
| CD-ROM | | | |
4 x 3.5" SCSI HDD Backplane | | |
Fans | - 4x 10,200 RPM counter rotating fans
| | |
Cold-swappable 500W AC power supply module with PFC [ 20-pin, (4-pin, 8-pin = 12V) ] | AC Voltage | - 100 - 240V, 60-50Hz, 10 Amp Max
| DC Output | | +5V | | +5V standby | | +12V | | -12V | | +3.3V | | | |
BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
- SST49LF080A BIOS Chip
| BIOS Features | - Plug and Play (PnP)
- ACPI 2.0
- PCI 2.2
- DMI 2.3
- BIOS Rescue Hot Keys
- SMBIOS 2.3
- USB Keyboard support
| | |
CPU | - Monitors CPU Core Voltages, +5V, ±12V & +2.5V, 2.5V Standby, +5V Standby, VBAT.
- Monitor for HyperTransport voltage 1.2V, memory voltage 2.5V, DDR termination 1.25V
- Up to 5 fan status
- Supports System Management Utility
| FAN | - Total of up to five 3-pin fan headers
- 5 Tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low-noise Fan Speed Control
| Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- PC temperature sensing logic
| LED | - CPU / Overheat LED
- Suspend-state indicator LED
- +5V Standby alert LED
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
Request Systems Quote