Overview
- Four Six-Core AMD Opteron™ 8000 Series (Socket F) processor support; HT3.0 Link support
- Support up to 128GB of DDR2 800/667/533/400 MHz SDRAM
- 1 (x16) / HTX Slot*, 1 (x8) PCI-e Slot, 2 64-bit 133/100MHz PCI-X, 2 64-bit 100MHz PCI-X, 1 HyperTransport (HTX)
- nVidia MCP55 Pro / AMD 8132 Chipsets
- 5 x 3.5" Hot-swap SATA Drive Bays
- Intel 82546GB Dual-port Gigabit LAN/Ethernet Controller
- 1000W Redundant Power Supply
Technical Specification
|
AS-4041M-T2R | - A+ Server 4041M-T2R (Beige)
| AS-4041M-T2RB | - A+ Server 4041M-T2RB (Black)
| | |
Super H8QME-2 | | |
CPU | - Quad 1207-pin Socket F
- Supports up to four Six-Core AMD Opteron™ 8000 Series (Socket F) processors
- HT3.0 Link support
| Chipset | | | |
Memory Capacity | - Sixteen 240-pin DIMM sockets
- Supports up to 128GB of DDR2 800/667/533/400 MHz SDRAM
- Single or Dual (recommended) channel memory support
- For Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
| Memory Type | - DDR2 800/667/533/400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | - 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | |
SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5 JBOD Support
| IPMI | - Intelligent Platform Management Interface v2.0 (Optional: AOC-SIMSO R3.00)
- 200-pin IPMI slot (SIMSO)
- NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
- RMM (Remote Management Module)
- (Card not included)
- For Dedicated LAN, cable CBL-0177Lmust be used (cable sold separately)
| Network Controllers | - Intel® 82546GB Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| Super I/O | | VGA | - ATI ES1000 Graphics Controller
| | |
SATA | | IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
| LAN | | USB | - FUCI
- Up to 4 USB Ports 2.0 Compliant
- 2 Rear Ports
- 2 Internal Headers
| Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 1 Fast UART 16550 serial port
- 1 Header
| Parallel Port | - 1 ECP / EPP parallel port
| VGA | | |
Form Factor | - Tower / 4U Rackmountable
- Optional Rackmount Kit (MCP-290-00001-00)
| Model | | | |
Height | | Width | | Depth | | Gross Weight | | Available Colors | | | |
Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- Power Fail LED
| Ports | | | |
Hot-swap | - 5 x 3.5" Hot-swap SATA Drive Trays
| Peripheral Bay(s) | - 3x 5.25" Peripheral Drive Bay
| | |
PCI-Express | - 1 x16 PCI-e / HTX Slot*
- 1 x8 PCI-e Slot
| PCI-X | - 2 64-bit 133/100MHz PCI-X (3.3V) slots
- 2 64-bit 100MHz PCI-X (3.3V) slot
| | |
SATA Hard Drive Backplane | | |
Fans | - 3x 5000 RPM Hot-Swappable Cooling Fans
- 3x 5000 RPM Hot-Swappable Rear Exhaust Fan
| Shrouds | | | |
1000W AC-DC high-efficiency power supply w/ PFC + PDB | AC Voltage | - 100 - 240V, 50 - 60Hz, 15 - 7Amp
| +5V standby | | +12V | | With Power Distributor | - +5V: 20 Amp
- +3.3V: 20 Amp
- -12V: 0.6 Amp
| | |
CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- CPU 4-Phase-switching voltage reulator
| FAN | - Total up to 9-fan status tachometer monitoring
- Up to nine 3-pin fan headers
- Status monitor for speed control
- Support 3-pin fans with fan-speed control
| Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- PC Temperature Sensing Logic
| LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
| | |
BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
- SST 49LF080A BIOS Chip
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
Request Systems Quote