+
+(1) 408-943-8000
My Cart 0

You have no items in your shopping cart.

Save 13%

Micron M500DC 240GB,SATA 6Gb/s, 20nm MLC 2.5" 7.0mm, 3DWPD

Micron M500DC 240GB,SATA 6Gb/s, 20nm MLC 2.5" 7.0mm, 3DWPD

SKU:

MTFDDAK240MBB-1AE1ZABYY

Weight:
5 lbs
Shipping:
Ships within 3-5 days
Price:

$210.22

$183.32

Availability In stock

FREE SHIPPING AVAILABLE

Overview

  • Micron® 20nm MLC NAND Flash
  • RoHS-compliant package
  • SATA 6 Gb/s interface
  • ATA modes supported
  • 512-byte
  • Hot-plug capable
  • Native command queuing support with 32-command slot support

Technical Specification

Features

Micron® 20nm MLC NAND Flash

RoHS-compliant package

SATA 6 Gb/s interface

ATA modes supported

PIO mode 3, 4

Multiword DMA mode 0, 1, 2

Ultra DMA mode 0, 1, 2, 3, 4, 5

Enterprise sector size support

512-byte

Hot-plug capable

Native command queuing support with 32-command slot support

ATA-8 ACS2 command set compliant

ATA security feature command set and password login support

Security erase command set: fast and secure erase

Self-monitoring, analysis, and reporting technology (SMART) command set

120GB performance (steady state)

Sequential 128KB read: 425 MB/s

Sequential 128KB write: 200 MB/s

Random 4KB read: 63,000 IOPS

Random 4KB write: 23,000 IOPS

READ latency: 0.50ms

WRITE latency: 1.5ms

240GB performance (steady state)

Sequential 128KB read: 425 MB/s

Sequential 128KB write: 330 MB/s

Random 4KB read: 63,000 IOPS

Random 4KB write: 33,000 IOPS

READ latency: 0.50ms

WRITE latency: 1.5ms

480GB performance (steady state)

Sequential 128KB read: 425 MB/s

Sequential 128KB write: 375 MB/s

Random 4KB read: 63,000 IOPS

Random 4KB write: 35,000 IOPS

READ latency: 0.50ms

WRITE latency: 1.5ms

800GB performance (steady state)

Sequential 128KB read: 425 MB/s

Sequential 128KB write: 375 MB/s

Random 4KB read: 65,000 IOPS

Random 4KB write: 24,000 IOPS

READ latency: 0.50ms

WRITE latency: 1.5ms

Reliability

Mean time to failure (MTTF): 2 million device hours

Static and dynamic wear leveling

Uncorrectable bit error rate (UBER): <1 sector per 1016 bits read

End-to-end data protection

Enhanced power-loss data protection with data protection capacitor monitoring

Endurance: Total bytes written (TBW)

120GB: 0.5PB; 240GB: 1.0PB; 480GB: 1.9PB; 800GB: 1.9PB

Capacity (unformatted): 120GB, 240GB, 480GB, 800GB

Mechanical: 7.0mm height

SATA connector: 5V ±10%

2.5-inch drive: 100.2mm x 69.85mm x 7.0mm

Conforms to SFF standards

Field-upgradeable firmware

Power consumption: <6.0W (TYP); <6.3W (TYP) for 800GB

Operating temperature

Commercial (0°C to 70°C)

Part Numbering Information

Micron’s M500DC SSD is available in different configurations and densities. Visit micron.com for a list of valid part numbers.

General Description

Micron’s M500DC solid state drive (SSD) uses a single-chip controller with a SATA interface on the system side and n-channels of Micron NAND Flash internally. Packaged in an HDD replacement enclosure, the SSD integrates easily in existing storage infrastructures.

The M500 DC is designed to support and manage the needs of enterprise platforms that utilize high IOPs traffic previously supported solely by SLC solutions, it provides the performance, endurance, and data integrity required by these growing environments.

Logical Block Address Configuration

The drive is set to report the number of logical block addresses (LBA) that will ensure sufficient storage space for the specified density. Standard LBA settings, based on the IDEMA standard (LBA1-02), are shown below.

Table 1. Standard LBA Settings – 512-Byte Sector Size

 

Drive Size

Total LBA

 

Max LBA

User Available Bytes

Decimal

Hexadecimal

Decimal

Hexadecimal

(Unformatted)

240GB

468,862,128

1BF244B0

468,862,127

1BF244AF

240,057,409,536

 

Products and specifications discussed herein are subject to change by Micron without notice. This data sheet contains minimum and maximum limits specified over the power supply and temperature range set forth herein. Although considered final, these specifications are subject to change, as further product development and data characterization sometimes occur.

Reviews

Write your own review

You're reviewing: Micron M500DC 240GB,SATA 6Gb/s, 20nm MLC 2.5" 7.0mm, 3DWPD

Customer Reviews

There are no reviews for this product yet.

Newsletter

Subscribe Now to get Saving Offers
Supermicro Partner