|
| | | AS-2042G-72RF4 | - A+ Server 2042G-72RF4 (Black)
|
| | |
| | | CPU | - Quad 1944-pin Socket G34
- Supports up to four 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
- HT3.0 Link support
| | Chipset | - AMD SR5690/SR5670/SP5100 Chipset
|
| | |
| | | Memory Capacity | - 32 DIMM sockets
- Support up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs
- Quad channel memory bus
- For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
| | Memory Type | - Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| | |
| | | SATA | - AMD SP5100 (RAID 0, 1, 10)
| | SAS | - LSI 2208 8-port SAS2 controller
- HW RAID 0, 1, 5, 6, 10, 50, 60 (1GB cache)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
| | Network Controllers | - Intel® I350 controller, 4-Port Gigabit Ethernet
- 10/100/1000BASE-T support
| | VGA | - Matrox G200 16MB DDR2 graphics
| | Super I/O | |
| | |
| | | SATA | | | SAS | | | LAN | - 4 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
| | USB | - 7x USB 2.0 ports
- 2x Rear, 4x internal header, and 1x type A
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1x Fast UART 16550 serial port
- 1x serial port header
|
| | |
| | | BIOS Type | - 16Mb SPI Flash ROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| | |
| | | Height | 1.7" (43mm) | | Width | 17.2" (437mm) | | Depth | 28.2" (716mm) | | Gross Weight | 69 lbs (31.3kg) | | Available Colors | Black |
| | |
| | | Buttons | • Power On/Off button
• System Reset button | | LEDs | • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power fail LED | | Ports | 2x USB Ports + DB9 COM Port (optional) |
| | |
| | | Hot-swap | - 6x 3.5" SAS/SATA Hot-swap drive trays
- Enterprise SATA HDD only recommended
|
| | |
| | | 1x 2U SAS / SATA backplane w/ SES-II |
| | |
| | | Fans | 6x 80mm 6500 RPM fans |
| | |
| | | Redundant 1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2 | | AC Voltage | - 100-240 V, 50-60 Hz, 15 Amp max
| | +12V | - 100 Amp/115 Vac
- 117 Amp/230 Vac
| | With Power Distributor | - +5V: 30 Amp
- +3.3V: 25 Amp
- -12V: 0.6 Amp
| | Certification | 
Platinum Certified |
| | |
| | | CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V Standby, sVBAT, HT, memory, chipset
- CPU switching voltage regulator
| | FAN | - Up to 9-fan status tachometer monitoring
- Up to nine 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control
(4-pin fan only) - Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 9x fan connectors
- I2C Temperature Sensing Logic
| | LED | - CPU / System Overheat LED
- +5V Standby Alert LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| | |
| | | RoHS | | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
