Product SKUs | |
SBI-7125W-S6 | Processor Blade SBI-7125W-S6 (Black) |
Motherboard | |
Super B7DW3 | |
Processor/Cache | |
CPU | Dual 771-pin LGA Sockets |
| Supports up to two Intel® 64-bit Xeon®processor(s) of the same type below: |
| Quad-Core Intel® |
| Xeon®Processor |
| 5400/5300 sequence |
| (Harpertown |
| /Clovertown processor) |
| Dual-Core Intel® |
| Xeon®Processor 5200/5100/5000 |
| sequence (Wolfdale |
| /Woodcrest/Dempsey processor) |
System Bus | 1600 / 1333 / 1066 MHz system bus |
Operating System Software | Supports 64-bit Operating Systems |
| Supports 32-bit Operating Systems |
Memory Capacity | Eight 240-pin DIMM sockets |
| Dual branch memory bus |
| Memory must be populated in pairs |
Memory Type | 800* /667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 512 MB, 1GB, 2GB, 4GB, 8GB |
Memory Voltage | 1.5 & 1.8V |
Error Detection | Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) |
| Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
On-Board Devices | |
Chipset | Intel® 5400 (Seaburg) chipset |
| MCH + ESB2 |
InfiniBand Support | 4x DDR (20Gb/s) InfiniBand mezzanineHCA (Optional) |
SAS | LSI SAS 1078 |
| RAID 0, 1, 5, 6, 10, 50, 60 support |
IPMI | Support for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM) |
| (Optional: AOC-SIMBL) |
Network Controllers | Intel® (ESB2) 82563EB Dual-Port Gigabit Ethernet PHY Controller |
| Intel® I/OAT support for fast, scaleable, and reliable networking |
Graphics | ATI ES1000 controller with 16 MB of video memory |
Super I/O | Winbond 83627HF chip |
Clock Generator | CK410B chip |
System BIOS | |
| |
BIOS Type | 16Mb Flash EEPROM with Phoenix® BIOS |
BIOS Features | Plug and Play (PnP) |
| SMBIOS 2.3 |
| DMI 2.1 |
| PCI 2.2 |
| ACPI 2.0 |
| USB Keyboard support |
| Hardware BIOS Virus protection |
Dimensions | |
Height | 11.32" (288 mm) |
Width | 1.67" (42.4 mm) |
Depth | 18.9" (480mm) |
Weight | 8.6 lbs (3.9 kg) |
Available Colors | Black |
Front Panel | |
Buttons | Power On/Off button |
| KVM button |
LEDs | Power LED |
| UID / KVM LED |
| Network Activity LED |
| Fault LED |
Connector | SUV (Serial/USB/Video) & KVM Connector |
Drive Bays | |
Hot-swap | 6x 2.5" SAS/SATA Hot-swap drive bays |
Input / Output | |
KVM | 1 Front Connector for Supermicro KVM Card |
SIMBL | 1 SIMBL Slot |
| |
Operating Environment / Compliance | |
Environmental Spec. | Operating Temperature: 10°to 35°C (50°to 95°F) |
| Non-operating Temperature: -40°to 70°C (-40°to 158°F) |
| Operating Relative Humidity: 8% to 90% (non-condensing) |
| Non-operating Relative Humidity: 5 to 95% (non-condensing) |
Electromagnetic Compatibility (EMC) | |
United States / Canada | FCC- Emissions (US) Verification |
Europe | EN55022 - Emissions |
| EN55024 - Immunity |
| EN61000-3-2 - Harmonics |
| EN61000-3-3 - Voltage Flicker |
| CE - EMC Directive 89/336/EEC |
Safety Compliance | |
United States / Canada | UL60950-1 - CSA/CUL 60950-1 |
Europe | EN60950-1, CE - Low Voltage Directive 73/23/EEE |
Germany | TUV |
Download | |
Drivers | [ Download ] |
Driver CD Image | [ Download ] |