| Product SKUs | |
| | |
| SSG-2028R-ACR24H | SuperServer 2028R-ACR24H (Black) |
| | |
| Motherboard | |
| | |
| Super X10DRH-iT | |
| | |
| Processor/Cache | |
| | |
| CPU | Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) * |
| | |
| | Dual Socket R3 (LGA 2011) |
| Cores / Cache | Up to 22 Cores† / Up to 55MB† Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| | |
| System Memory | |
| | |
| Memory Capacity | 16x 288-pin DDR4 DIMM slots |
| | Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | RDIMM: 32GB, 16GB, 8GB, 4GB |
| | LRDIMM: 64GB, 32GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| | |
| On-Board Devices | |
| | |
| Chipset | Intel® C612 chipset |
| SAS | SAS3 (12Gbps) via LSI 3108 AOC; HW RAID |
| | 3x LSI 3108 controller |
| | RAID 0, 1, 5, 6, 10, 50, 60 |
| SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| | IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| | ASPEED AST2400 BMC |
| Network Controllers | Intel® X540 Dual Port 10GBase-T |
| | Virtual Machine Device Queues reduce I/O overhead |
| | Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| | 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Video | ASPEED AST2400 BMC |
| | |
| Input / Output | |
| | |
| LAN | 2x RJ45 10GBase-T LAN ports |
| | 1x RJ45 Dedicated IPMI LAN port |
| USB | 2x USB 3.0 ports (rear) |
| | 2x USB 2.0 ports (rear) |
| | 1x Type A |
| Video | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 port / 1 Header |
| Chassis | |
| Model | CSE-216BAC-R920LPB |
| Dimensions | |
| Width | 17.2" (437mm) |
| Height | 3.5" (89mm) |
| Depth | 24.8" (630mm) |
| Gross Weight | 61 lbs (27.7 kg) |
| Available Colors | Black |
| Front Panel | |
| Buttons | Power On/Off button |
| | System Reset button |
| LEDs | Power status LED |
| | Hard drive activity LED |
| | 2x Network activity LEDs |
| | System Overheat LED |
| | Power fail LED |
| Expansion Slots | |
| PCI-Express | 1x PCI-E 3.0 x16 slot |
| | 6x PCI-E 3.0 x8 slots |
| | Slot 1-3 occupied by RAID controller |
| Drive Bays | |
| Hot-swap | 24x 2.5" Hot-swap SAS3/SATA3 HDD bays |
| Optional | 2x 2.5" Hot-swap HDD bays (rear) |
| Backplane | |
| SAS3 12Gb/s direct attached storage backplane, w/ 24x SAS3 2.5" drive slots | |
| System Cooling | |
| Fans | 3x 8cm hot-swap redundant PWM cooling fans |
| Power Supply with Power Distributor | |
| 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C | |
| AC Input | 100-240 V, 50-60 Hz, 11-4.5 Amp |
| DC Output | 4 Amp @ +5V standby |
| | 75 Amp @ +12V |
| Certification | Platinum Level Certified94%+ Platinum Certified |
| | [ Test Report ] |
| System BIOS | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) |
| | APM 1.2 |
| | PCI 2.2 |
| | ACPI 1.0 / 2.0 |
| | USB Keyboard support |
| | SMBIOS 2.3 |
| | UEFI |
| Operating Environment / Compliance | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: |
| | 10°C to 35°C (50°F to 95°F) |
| | Non-operating Temperature: |
| | -40°C to 70°C (-40°F to 158°F) |
| | Operating Relative Humidity: |
| | 8% to 90% (non-condensing) |
| | Non-operating Relative Humidity: |
| | 5% to 95% (non-condensing) |
