Product SKUs |
SYS-1028U-TRT+ | - SuperServer 1028U-TRT+ (Black)
|
Motherboard |
Super X10DRU-i+ |
Processor/Cache |
CPU | - Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP **)
- Dual Socket R3 (LGA 2011)
|
Cores / Cache | - Up to 22 Cores† / Up to 55MB† Cache
|
System Bus | |
Note | ** Please contact your Supermicro sales representative for additional details. |
System Memory |
Memory Capacity | - 24x 288-pin DDR4 DIMM sockets
- Up to 3TB† ECC 3DS LRDIMM, 768GB ECC RDIMM
|
Memory Type | - 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
|
Memory Voltage | |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
On-Board Devices |
Chipset | - Intel® C612 Express chipset
|
SATA | - SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Connectivity | - 2x 10GBase-T ports via AOC-UR-i2XT
|
Graphics | |
Input / Output |
SATA | |
SAS | - 8x SAS3 ports support via optional Add-on Card
|
NVMe | - 2x NVMe ports support via optional Add-on Card (AOC-SLG3-2E4)
|
LAN | - 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | - 5x USB 3.0 ports
(2 rear, 2 onboard header, 1 Type A)
|
Video | |
Serial Port | |
System BIOS |
BIOS Type | - 16Mb SPI Flash EEPROM with AMI® BIOS
|
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI
|
Chassis |
Form Factor | |
Model | |
Dimensions |
Height | |
Width | |
Depth | |
Gross Weight | |
Available Color | |
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED
|
Expansion Slots |
PCI-Express | - 2x PCI-E 3.0 x16 slots (Full-height, 10.5" L)
- 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
Drive Bays |
Hot-swap | - 10x 2.5" Hot-swap drive bays
|
System Cooling |
Fans | - 4x heavy duty fans with optimal fan speed control
|
Air Shroud | |
Power Supply |
750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
AC Input | - 100-127Vac, 50-60Hz
- 200-240Vac, 50-60Hz
|
+12V | - Max: 62.5A & Min: 0A (100Vac-127Vac)
- Max: 62.5A & Min: 0A (200Vac-240Vac)
|
12V SB | |
Certification | Platinum Level (Cert. in progress) |
PC Health Monitoring |
CPU | - Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage regulator
|
FAN | - Total of ten 4-pin PWM fans
- 10x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 10x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
|
Other Features | |
Operating Environment / Compliance |
RoHS | |
Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|