Overview
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
- Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 family†
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM, up to 1866MHz; 16x DIMM sockets
- 1x PCI-E 3.0 x16 Low-profile slot
- Intel® i350 Dual port GbE LAN
- Integrated IPMI 2.0 with KVM and Dedicated LAN
- Single port IB (FDR, 56 Gbps), w/ QSFP connector
- 6x 2.5" Hot-swap SAS/SATA HDD Bays
- LSI 3108 SAS3 controller (6 ports), RAID 0, 1, 5, 6, 10, 50
- 2000W Redundant Power Supplies Platinum Level (94%)
Technical Specification
|
| SYS-2027PR-HC1FR | - SuperServer 2027PR-HC1FR (Black)
|
| |
| CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family† (up to 135W TDP *) * Please contact your Supermicro sales representative for additional details | Note | † BIOS version 3.0 or above is required | Cache | | System Bus | |
| |
| Memory Capacity | - 16x 240-pin DDR3 DIMM sockets
- Supports up to 1TB DDR3 ECC LRDIMM
- Supports up to 512GB DDR3 ECC Registered memory (RDIMM)
| Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
| Chipset | | Infiniband | - Mellanox ConnectX-3 FDR Infiniband 56Gb/s Controller
| SAS | - LSI 3108 SAS3 (12Gbps) controller;
RAID 0, 1, 5, 6, 10, 50 support - Note: In order to support the LSI RAID Controllers, both CPU socket must be populated
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| Graphics | |
| |
| SAS | | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| Infiniband | - 1 external QSFP Infiniband connector
| USB | - 2x USB 2.0 ports total (2x rear)
| VGA | | Serial Port / Header | - 1x Fast UART 16550 port / 1 Header
|
| |
| Width | | Height | | Depth | | Gross Weight | | Available Colors | |
| |
| Buttons | - Power On/Off button
- System Reset button
- UID button
| LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| |
| PCI-Express | - 1x PCI-E 3.0 x16 Low-profile slot
|
| |
| Hot-swap | - 6x 2.5" Hot-swap SAS/SATA HDD trays
|
| |
| Fans | - 4x 8cm heavy duty PWM fans with optimal fan speed control
|
| |
2000W Redundant Power Supplies with I2C & PMBus | AC Input | - 1100W Output @ 100-120V, 12.7-10.5A, 50-60Hz
- 1400W Output @ 120-140V, 13.5-11.5A, 50-60Hz
- 1800W Output @ 200-220V, 10.0-9.5A, 50-60Hz
- 1980W Output @ 220-230V, 10.0-9.8A, 50-60Hz
- 2000W Output @ 230-240V, 10.0-9.8A, 50-60Hz
| 5Vsb | 4A | I2C Remote Monitoring | FRU Data / SMBus / PMBus | Certification |   Platinum Certified (Cert. in progress) |
| |
| BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
| RoHS | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
Request Systems Quote