| Product SKUs | |
| SYS-4028GR-TRT | SuperServer 4028GR-TRT (Black) |
| Motherboard | |
| Super X10DRG-OT+-CPU | |
| Processor/Cache | |
| CPU | Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP) * |
| | Dual Socket R3 (LGA 2011) |
| Cores / Cache | Up to 22 Cores† / Up to 55MB† Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| GPU/Xeon Phi Support | M40/K40M/K80/Xeon Phi |
| System Memory | |
| Memory Capacity | 24x 288-pin DDR4 DIMM slots |
| | Up to 1.5TB ECC LRDIMM, 768GB ECC RDIMM |
| Memory Type | 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | RDIMM: 32GB, 16GB, 8GB, 4GB |
| | LRDIMM: 64GB, 32GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| On-Board Devices | |
| Chipset | Intel® C612 chipset |
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| | IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| | ASPEED AST2400 BMC |
| Network Controllers | Dual Port 10GbE |
| | Virtual Machine Device Queues reduce I/O overhead |
| | Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Graphics | ASPEED AST2400 BMC |
| Input / Output | |
| SATA | 4x SATA3 (6Gbps) ports |
| LAN | 2x RJ45 10GBase-T LAN ports |
| | 1x RJ45 Dedicated IPMI LAN port |
| USB | 4x USB 3.0 ports |
| Video | 1x VGA Connector |
| Serial Port | 1x Serial header |
| System BIOS | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) |
| | APM 1.2 |
| | DMI 2.3 |
| | PCI 2.3 |
| | ACPI 1.0 / 2.0 / 3.0 |
| | USB Keyboard support |
| | SMBIOS 2.7.1 |
| | UEFI |
| Chassis | |
| Form Factor | 4U Rackmountable |
| | Rackmount Kit (MCP-290-00057-0N) |
| Model | CSE-418GTS-R3200B |
| Dimensions | |
| Height | 7.0" (178mm) |
| Width | 17.2" (437mm) |
| Depth | 29" (737mm) |
| Weight | Net Weight: 80 lbs (36.2 kg) |
| | Gross Weight: 135 lbs (61.2 kg) |
| Available Colors | Black |
| Drive Bays | |
| Hot-swap | 24x 2.5" Hard drive bays |
| Expansion Slots | |
| PCI-Express | 8x PCI-E 3.0 x16 (double-width) slots |
| | 2x PCI-E 3.0 x8 (in x16) slots |
| | 1x PCI-E 2.0 x4 (in x16) slot |
| Backplane | |
| SAS/SATA HDD Backplane | |
| System Cooling | |
| Fans | 8x 92mm RPM Hot-Swappable Cooling Fans |
| Shrouds | 1x Air Shroud (MCP-310-84806-0B) |
| | 1x Air Shroud (MCP-310-84807-0B) |
| Power Supply | |
| 1000W/1600W 1U Redundant Power Supply | |
| AC Input | 1000W @ 100-127V, 12.9A Max., 50-60Hz |
| | 1600W @ 200-240V, 9.5A Max., 50-60Hz |
| DC Output | 1000W: +12V/82A; +12Vsb/2A |
| | 1600W: +12V/132A; +12Vsb/2A |
| Certification | Platinum Level Certified94%+ Platinum Level |
| PC Health Monitoring | |
| CPU | Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages. |
| | 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V |
| FAN | 4-pin fan headers with tachometer status monitoring |
| | Low noise fan speed control mode |
| Temperature | Monitoring for CPU and system environment |
| | Thermal Control for 8x fan connectors |
| Other Features | Chassis intrusion detection |
| Operating Environment / Compliance | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: |
| | 10°C to 35°C (50°F to 95°F) |
| | Non-operating Temperature: |
| | -40°C to 70°C (-40°F to 158°F) |
| | Operating Relative Humidity: |
| | 8% to 90% (non-condensing) |
| | Non-operating Relative Humidity: |
| | 5% to 95% (non-condensing) |
