Product SKUs | |
SYS-6018U-TRTP+ | - SuperServer 6018U-TRTP+ (Black)
|
Motherboard | Super X10DRU-i+ |
Processor/Cache | |
CPU | - Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP) *
- Dual Socket R3 (LGA 2011)
|
Cores / Cache | - Up to 22 Cores† / Up to 55MB† Cache
|
System Bus | |
Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
System Memory | |
Memory Capacity | - 24x 288-pin DDR4 DIMM slots
- Up to 3TB† ECC 3DS LRDIMM, RDIMM
|
Memory Type | - 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes | - 64GB, 32GB, 16GB, 8GB, 4GB
|
Memory Voltage | |
Error Detection | - Corrects single-bit errors
|
On-Board Devices | |
Chipset | |
SATA | - SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Connectivity | |
Graphics | |
Input / Output | |
SATA | |
LAN | - 2x 10G SFP+ ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | - 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
|
Video | |
Serial Port | |
DOM | - 2x SATA DOM (Disk on Module) support with embedded power
|
System BIOS | |
BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
Management | |
Software | - SuperDoctor® 5
- Intel® Node Manager 3.0
- Watch Dog
- NMI
- SMCBU and SMM
- Optional IPMI 1.5 / 2.0
|
Power Configurations | - ACPI Power Management
- Power-on mode for AC power recovery
|
Chassis | |
Form Factor | |
Model | |
Dimensions and Weight | |
Height | |
Width | |
Depth | |
Weight | - Net Weight: 26 lbs (11.8 kg)
- Gross Weight: 41 lbs (18.6 kg)
|
Available Color | |
Front Panel | |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED
|
Expansion Slots | |
PCI-Express | - 2x PCI-E 3.0 x16 slots (Full-height, 10.5" L)
- 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
Drive Bays | |
Hot-swap | - 4x 3.5" Hot-swap drive bays
|
System Cooling | |
Fans | - 4x heavy duty fans with optimal fan speed control
- 4x additional fans optional
|
Air Shroud | |
Power Supply | 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
AC Input | - 100-127Vac, 50-60Hz
- 200-240Vac, 50-60Hz
|
+12V | - Max: 62.5A & Min: 0A (100Vac-127Vac)
- Max: 62.5A & Min: 0A (200Vac-240Vac)
|
12V SB | |
Certification | Platinum Level [ Test Report ] |
PC Health Monitoring | |
Voltage | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
FAN | - 8x 4-pin fan headers
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Support to monitor Supermicro AOC temperatures from IPMI or SD 5
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - Memory DIMM ECC error LEDs
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
Other Features | - 4x 8-pin GPU power connectors
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
|
Operating Environment / Compliance | |
RoHS | |
Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|