| Product SKUs | |
| SYS-6028R-TR | SuperServer 6028R-TR (Black) |
| Motherboard | |
| Super X10DRi | |
| Processor/Cache | |
| CPU | Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) * |
| | Dual Socket R3 (LGA 2011) |
| Cores / Cache | Up to 22 Cores† / Up to 55MB† Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | 16x 288-pin DDR4 DIMM slots |
| | Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | RDIMM: 64GB, 16GB, 8GB, 4GB |
| | LRDIMM: 64GB, 32GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| On-Board Devices | |
| Chipset | Intel® C612 chipset |
| SATA | SATA 3.0 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| | IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| | ASPEED AST2400 BMC |
| Network Controllers | Intel® i350 Dual Port Gigabit Ethernet |
| | Virtual Machine Device Queues reduce I/O overhead |
| | Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| | 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | ASPEED AST2400 BMC |
| Input / Output | |
| Serial ATA | 8x SATA3 (6Gbps) ports |
| | 2x SATA3 powered ports that support SATA DOM |
| LAN | 2x RJ45 Gigabit Ethernet LAN ports |
| | 1x RJ45 Dedicated IPMI LAN port |
| USB | Rear USB: 2x USB 3.0 + 2x USB 2.0 |
| | Front USB: 2x USB 2.0 |
| | USB Header: 2x 3.0, 2x 2.0, 1x Type A |
| VGA | 1x VGA port |
| Serial Port / Header | 2x Fast UART 16550 serial |
| | 2x COM Ports (1 rear, 1 header) |
| DOM | 2x SuperDOM (Disk on Module) ports |
| Management | |
| Software | SuperDoctor® 5 |
| | Watch Dog |
| | NMI, SPM, SUM |
| | IPMI 2.0 |
| | Intel Node Manager |
| Power Configurations | ACPI / APM Power Management |
| | Power-on mode for AC power recovery |
| Chassis | |
| Form Factor | 2U Rackmount |
| Model | CSE-825TQ-R740LPB |
| Dimensions and Weight | |
| Width | 17.2" (437mm) |
| Height | 3.5" (89mm) |
| Depth | 25.5" (647mm) |
| Package | 26" (H) x 11" (W) x 34.5" (D) |
| Weight | Net Weight: 35.5 lbs (16 kg) |
| | Gross Weight: 69 lbs (31.2 kg) |
| Available Colors | Black |
| Front Panel | |
| Buttons | Power On/Off button |
| | System Reset button |
| | UID button |
| LEDs | Power status LED |
| | HDD activity LED |
| | 2x Network activity LEDs |
| | System information (overheat/UID) LED |
| Expansion Slots | |
| PCI-Express | 3x PCI-E 3.0 x16 (Low-profile) |
| | 3x PCI-E 3.0 x8 (Low-profile) |
| Drive Bays | |
| Hot-swap | 8x 3.5" Hot-swap SATA HDD trays |
| Backplane | |
| 2U SAS/SATA backplane | |
| System Cooling | |
| Fans | 3x 80x80x38mm Counter-rotating PWM fans |
| Power Supply with Power Distributor | |
| | |
| 740W (1+1) Redundant high-efficiency power supply with PMBus | |
| AC Input | 100-240 V, 50-60 Hz, 9-3.5 Amp |
| DC Output | 4 Amp @ +5V standby |
| | 61.7 Amp @ +12V |
| Certification | Platinum Level Certified |
| | Platinum Certified |
| | [ Test Report ] |
| | |
| System BIOS | |
| | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) |
| | APM 1.2 |
| | PCI 2.3 |
| | ACPI 1.0 / 2.0 / 3.0 / 4.0 |
| | USB Keyboard support |
| | SMBIOS 2.7.1 |
| | UEFI 2.3.1 |
| Operating Environment / Compliance | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: |
| | 10°C to 35°C (50°F to 95°F) |
| | Non-operating Temperature: |
| | -40°C to 70°C (-40°F to 158°F) |
| | Operating Relative Humidity: |
| | 8% to 90% (non-condensing) |
| | Non-operating Relative Humidity: |
| | 5% to 95% (non-condensing) |
