Product SKUs | |
SYS-6028U-TRTP+ | SuperServer 6028U-TRTP+ (Black) |
Motherboard | |
Super X10DRU-i+ | |
Processor/Cache | |
CPU | Intel® Xeon® processor E5-2600v4/ v3 family (up to 160W TDP) * |
| |
| Dual Socket R3 (LGA 2011) |
Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
System Bus | QPI up to 9.6 GT/s |
Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
System Memory | |
Memory Capacity | 24x 288-pin DDR4 DIMM slots |
| Up to 1.5TB ECC LRDIMM, RDIMM |
Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | 64GB, 32GB, 16GB, 8GB, 4GB |
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors |
On-Board Devices | |
Chipset | Intel® C612 chipset |
SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| ASPEED AST2400 BMC |
Network Connectivity | 2x 10G SFP+ ports via AOC-2UR68-i2XS |
| Intel® 82599ES 10G SFP+ |
| 1x Realtek RTL8211E PHY (dedicated IPMI) |
Graphics | ASPEED AST2400 BMC |
Input / Output | |
SATA | 10x SATA3 (6Gbps) ports |
SAS | 12x SAS3 ports support via optional Add-on Card |
LAN | 2x 10G SFP+ ports |
| 1x RJ45 Dedicated IPMI LAN port |
USB | 5x USB 3.0 ports |
| (2 rear, 2 onboard header, 1 Type A) |
Video | 1x VGA Connector |
Serial Port / Header | 1x Serial header |
DOM | 2x SuperDOM (Disk on Module) ports |
System BIOS | |
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | Plug and Play (PnP) |
| APM 1.2 |
| PCI 2.3 |
| ACPI 1.0 / 2.0 / 3.0 / 4.0 |
| USB Keyboard support |
| SMBIOS 2.7.1 |
| UEFI 2.3.1 |
Management | |
Software | SuperDoctor® 5 |
| Intel® Node Manager 3.0 |
| Watch Dog |
| NMI |
| SMCBU and SMM |
| Optional IPMI 1.5 / 2.0 |
Power Configurations | ACPI Power Management |
| Power-on mode for AC power recovery |
Chassis | |
Form Factor | 2U Rackmount |
Model | CSE-829UAC-R1K02 |
Dimensions and Weight | |
| |
Width | 17.2" (437mm) |
Height | 3.5" (89mm) |
Depth | 28.46" (723mm) |
Weight | Net Weight: 36 lbs (16.4 kg) |
| Gross Weight: 72 lbs (32.7 kg) |
Available Colors | Black |
Front Panel | |
Buttons | Power On/Off button |
| System Reset button |
LEDs | Power status LED |
| HDD activity LED |
| |
| 2x Network activity LEDs |
| System information (overheat/UID) LED |
Expansion Slots | |
PCI-Express | 1x PCI-E 3.0 x16 slot (FH, 10.5" L) |
| 7x PCI-E 3.0 x8 slots |
| (5x FH, 10.5" L, 1x LP, 1x Internal LP) |
| (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
Drive Bays | |
Hot-swap | 12x Hot-swap 3.5" Drive Bays: |
| 10x SATA3 ports by default |
| Optional drive support: 12x SAS3 |
| Note: optional storage card is required to support more than 10 drives. |
Backplane | |
2U SAS3 backplane | |
System Cooling | |
Fans | 4x 8cm heavy duty PWM fans |
Power Supply with Digital Switching Control | |
1000W Redundant Titanium Level (96%) Single Output Power Supplies | |
AC Input | 100-127 V, 50-60 Hz |
| 200-240 V, 50-60 Hz |
+12V | Max: 62.5A & Min: 0A (100Vac-127Vac) |
| Max: 83A (200Vac-240Vac) & Min: 0A |
12V SB | Max: 2.1A |
| Min: 0A |
Certification | Titanium Level96% Titanium Level |
| [ Test Report ] |
PC Health Monitoring | |
Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. |
| 5+1 Phase-switching voltage regulator |
FAN | 8x 4-pin fan headers |
| Status monitor for speed control |
| Pulse Width Modulated (PWM) fan connectors |
Temperature | Support to monitor Supermicro AOC temperatures from IPMI or SD 5 |
| Monitoring for CPU and chassis environment |
| CPU thermal trip support |
| Thermal Control for 8x Fan Connectors |
| Thermal Monitor 2 (TM2) support |
| PECI |
LED | Memory DIMM ECC error LEDs |
| CPU / System Overheat LED |
| Suspend static indicator LED |
| UID/Remote UID |
Other Features | 4x 8-pin GPU power connectors |
| Chassis intrusion detection |
| Chassis intrusion header |
| SDDC Support |
| RoHS |
Operating Environment / Compliance | |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature: |
| 10°C to 35°C (50°F to 95°F) |
| Non-operating Temperature: |
| -40°C to 60°C (-40°F to 140°F) |
| Operating Relative Humidity: |
| 8% to 90% (non-condensing) |
| Non-operating Relative Humidity: |
| 5% to 95% (non-condensing) |