Product SKUs |
SYS-8025C-3RB | - SuperServer 8025C-3RB (Black)
|
Motherboard | |
Processor/Cache |
CPU | - Quad 604-pin FC-PGA6 Sockets
- Supports up to four Intel® 64-bit Xeon® MP processor(s) of the same type below:
- 6-Core Intel® Xeon®
Processor 7400 sequence - Quad-Core Intel® Xeon®
Processor 7300 sequence - Dual-Core Intel® Xeon®
Processor 7200 sequence
|
System Bus | |
Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
System Memory |
Memory Capacity | - Twenty-four 240-pin DIMM sockets
- Supports up to 192 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Quad branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
Memory Type | - 667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes | |
Memory Voltage | |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
On-Board Devices |
Chipset | - Intel® 7300 (Clarksboro) chipset
- ESB2
|
SAS | - LSI 1068E Serial-Attached SCSI (SAS) Controller
- SAS Dual-Channel (internal)
- Each SAS channel supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives
- Host RAID 0, 1, & 10 support (Optional RAID 5 w/ AOC-iButton68)
- SGPIO
|
SATA | - Intel ESB2 SATAII Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMSO)
- (Optional: AOC-SIMSO(+))
- For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
|
Network Controllers | - Intel® 82575EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
Graphics | - ATI ES1000 controller with 32 MB of video memory
|
Super I/O | |
Clock Generator | |
Input / Output |
SAS | |
Serial ATA | |
IDE | - Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- Compact Flash (40-pin connector, IDE 1, single channel) slot
|
Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB
|
LAN | |
USB | - 2x USB rear ports
- 3x USB internal header
- 5 total USB ports, 2.0 Compliant / 1.1 Compliant
|
VGA | |
Keyboard / Mouse | - PS/2 keyboard and mouse ports
|
Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Header
|
Chassis |
Form Factor | |
Model | |
Dimensions |
Height | 3.5" (89mm) |
Width | 17.2" (437mm) |
Depth | 27.75" (705mm) |
Gross Weight | 53 lbs (24.0kg) |
Available Colors | Black |
Front Panel |
Buttons | • Power On/Off button • System Reset button |
LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED • Power fail LED |
Ports | 2x USB Ports + DB9 COM Port |
Expansion Slots |
PCI-Express | - 1 (x8) PCI-e (using x16) low-profile slot
- 1 (x8) PCI-e (using x8) low-profile slot
- 1 (x4) PCI-e (using x8) low-profile slot
|
PCI-X | - 1x 64-bit 133MHz PCI-X (3.3V) low-profile slot
|
Drive Bays |
Hot-swap | - 6 x 3.5" Hot-swap SAS drive trays
|
Peripheral Drives |
DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM Drive |
Floppy | Slim 1.44MB Floppy Drive (Optional) |
SAS / SATA Backplane |
1x SAS / SATA backplane |
System Cooling |
Fans | |
Shroud | |
Power Supply |
1200W (1 + 1) Redundant high-efficiency power supply w/ PFC |
1200W |
+5V standby | |
+12V | |
900W |
+5V standby | |
+12V | |
With Power Distributor | - +5V: 20 Amp
- +3.3V: 20 Amp
- -12V: 0.6 Amp
|
System BIOS |
BIOS Type | - 8Mb Flash EEPROM with AMI ® BIOS
|
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
PC Health Monitoring |
CPU | - Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
- CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN | - Total of nine 4-pin fans
- 9x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support for 3-pins (w/ speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 9x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - CPU / System Overheat LED
- Suspend-state Indicator LED
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
- Chipkill Support
|
Operating Environment / Compliance |
Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|