Overview
- Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600v4†/ v3 family; QPI up to 9.6GT/s
- Up to 2TB† ECC DDR4 2133MHz; 16x DIMM sockets
- Expansion slots: 1 PCI-E 3.0 x16 (LP) 1 PCI-E 3.0 x8 (Micro Low Profile) See Cable Configuration Map
- I/O ports: 2 GbE ports, 1 Built-in video, 1 COM/Serial port, 2 USB 3.0 ports
- Built-in Server management tool (IPMI 2.0, KVM/media over LAN) with dedicated LAN port
- 6x Hot-swap 2.5" SATA3 HDD Bays
- 3x heavy duty internal fans
- 1620W Redundant Power Supplies Platinum Level (94%)
- † BIOS version 2.0 or above is required
Technical Specification
|
| | | SYS-F618R2-RT+ | - SuperServer F618R2-RT+ (Black)
|
| | |
| | | CPU | - Intel® Xeon® processor E5-2600 v4†/v3 family (up to 145W TDP **)
- Dual Socket R3 (LGA 2011)
| | Cores / Cache | - Up to 22 Cores† / Up to 55MB† Cache
| | System Bus | | | Note | ** Please contact your Supermicro sales representative for additional details. |
| | |
| | | Memory Capacity | - 16x 288-pin DDR4 DIMM sockets
- Up to 2TB† ECC LRDIMM, 512GB ECC RDIMM
| | Memory Type | - 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
| | DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| | |
| | | Chipset | - Intel® C612 Express chipset
| | SATA | - SATA3 (6Gbps) with RAID 0, 1, 5, 10
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
| | Network Controllers | - Intel® i350-AM2 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Graphics | |
| | |
| | | Serial ATA | - 8x SATA3 (6Gbps) ports
- 2x SATA3 powered ports that support SATA DOM
| | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | | | VGA | | | Serial Port / Header | |
| | |
| | | Software | | | Power Configurations | - ACPI / APM Power Management
- Power-on mode for AC power recovery
|
| | |
| | | Width | | | Height | | | Depth | | | Weight | - Net Weight: 150 lbs (68.04 kg)
- Gross Weight: 200 lbs (90.71 kg)
| | Available Colors | |
| | |
| | | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
| | |
| | | Hot-swap | - 6x 2.5" Hot-swap SATA3 HDD trays
|
| | |
| | | Fans | - 3x 4cm 14k RPM middle fans
|
| | |
| 1620W high-efficiency redundant power supply w/ PMBus | | AC Input | - 1000W Output @ 100-120V, 12-10A, 50-60Hz
- 1200W Output @ 120-140V, 12-10A, 50-60Hz
- 1620W Output @ 180-240V, 10.5-8A, 50-60Hz
| | DC Output | - 1000W: +12V/84A; +5Vsb/4A
- 1200W: +12V/100A; +5Vsb/4A
- 1620W: +12V/150A; +5Vsb/4A
| | Certification |   Platinum Certified
[ Test Report ] |
| | |
| | | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| | |
| | | RoHS | | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
Request Systems Quote
