Product SKUs |
SYS-F618R2-RTN+ | - SuperServer F618R2-RTN+ (Black)
|
Motherboard | |
Processor/Cache |
CPU | - Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
- Dual Socket R3 (LGA 2011)
|
Cores / Cache | - Up to 22 Cores† / Up to 55MB† Cache
|
System Bus | |
Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
System Memory |
Memory Capacity | - 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC LRDIMM, 512GB ECC RDIMM
|
Memory Type | - 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
|
Memory Voltage | |
Error Detection | - Corrects single-bit errors
|
On-Board Devices |
Chipset | |
SATA | - SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers | - Intel® i350-AM2 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics | |
Input / Output (per node) |
Serial ATA | - 8x SATA3 (6Gbps) ports
- 2x SATA3 powered ports that support SATA DOM
|
NVMe | - 2x Internal NVMe ports (PCI-E 3.0 x4)
|
LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | |
VGA | |
Serial Port / Header | |
Management |
Software | |
Power Configurations | - ACPI / APM Power Management
- Power-on mode for AC power recovery
|
Chassis |
Form Factor | |
Model | |
Dimensions and Weight |
Width | |
Height | |
Depth | |
Package | - 28.3" (W) x 15.0" (H) x 42.4" (D)
|
Weight | - Net Weight: 150 lbs (68.04 kg)
- Gross Weight: 200 lbs (90.71 kg)
|
Available Colors | |
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
Expansion Slots (per node) |
PCI-Express | |
Drive Bays (per node) |
Hot-swap | - 6x 2.5" Hot-swap SATA or 4x 2.5" Hot-swap SATA + 2x SATA/NVMe hybrid
|
Backplane |
1x SAS/SATA backplane |
System Cooling (per node) |
Fans | - 3x 4cm 14k RPM middle fans
|
Power Supply with Digital Switching Control |
2000W Titanium Level (96%) High-efficiency Redundant Power Supplies |
Total Output Power | |
AC Input | - 100-127 V, 50-60 Hz
- 200-220 V, 50-60 Hz
- 220-230 V, 50-60 Hz
- 230-240 V, 50-60 Hz
|
+12V | - Max: 83.3A & Min: 0A (100Vac-127Vac)
- Max: 150A & Min: 0A (200Vac-220Vac)
- Max: 165A & Min: 0A (220Vac-230Vac)
- Max: 166.7A & Min: 0A (230Vac-240Vac)
|
5V SB | |
Certification | Titanium Level [ Test Report ] |
System BIOS |
BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing) |