| Product SKUs | |
| SSG-2028R-E1CR48N | SuperServer 2028R-E1CR48N (Black) |
| Motherboard | |
| Super X10DSC+ | |
| Processor/Cache | |
| CPU | Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) * |
| | |
| | Dual Socket R3 (LGA 2011) |
| Cores / Cache | Up to 22 Cores† / Up to 55MB† Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | † BIOS version 2.0 or above is required |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| | |
| System Memory | |
| | |
| Memory Capacity | 24x 288-pin DDR4 DIMM slots |
| | Up to 3TB† ECC 3DS LRDIMM, 768 ECC RDIMM |
| Memory Type | 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | RDIMM: 32GB, 16GB, 8GB, 4GB |
| | LRDIMM: 64GB, 32GB |
| | 3DS LRDIMM: 128GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| On-Board Devices | |
| Chipset | Intel® C612 chipset |
| SAS3 | LSI 3108 SAS3 onboard |
| | Hardware RAID 0, 1, 5, 6, 10, 50, 60 |
| SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| | IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| | ASPEED AST2400 BMC |
| Network Controllers | SIOM support for flexible networking options |
| Video | ASPEED AST2400 BMC |
| Input / Output | |
| LAN | LAN ports via SIOM Add-On-Card: |
| | (See SIOM Compatibility Matrix) |
| USB | 3x USB 3.0 ports (2 rear + 1 Type A) |
| Video | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 port / 1 Header |
| Chassis | |
| Form Factor | 2U Rackmount |
| Model | CSE-226STS-R1K62P1 |
| Dimensions | |
| Width | 17.2" (437mm) |
| Height | 3.5" (89mm) |
| Depth | 30.2" (767mm) |
| | With Cable Management Arm Installed: |
| | 35.2" (895mm) |
| Available Colors | Black |
| Front Panel | |
| Buttons | Power On/Off button |
| | System Reset button |
| LEDs | Power status LED |
| | Hard drive activity LED |
| | 2x Network activity LEDs |
| | System Overheat LED |
| | Power fail LED |
| Expansion Slots | |
| PCI-Express | 2x PCI-E 3.0 x16 slots |
| | 1x PCI-E 3.0 x8 slots |
| Drive Bays | |
| Hot-swap | 48x 2.5" Hot-swap SAS3/SATA3 drive bays |
| | 2x 2.5" rear Hot-swap drive bays |
| Backplane | |
| Two 24 port SAS3 12G expander backplanes, each supporting up to 24x 2.5" SAS3 drives |
| System Cooling | |
| Fans | 5x 8cm hot-swap redundant PWM cooling fans |
| Power Supply | |
| 1600W Redundant Titanium Level AC Power Supplies with PMbus | |
| Input | 100-127 V, 50-60 Hz |
| | 200-240 V, 50-60 Hz |
| +12V | Max: 83.3A & Min: 0A (100Vac-127Vac) |
| | Max: 133A & Min: 0A (200Vac-240Vac) |
| 12V SB | Max: 2.1A |
| | Min: 0A |
| Certification | Titanium Level96% Titanium Level Certified |
| System BIOS | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) |
| | APM 1.2 |
| | PCI 2.2 |
| | ACPI 1.0 / 2.0 |
| | USB Keyboard support |
| | SMBIOS 2.3 |
| | UEFI |
| Operating Environment / Compliance | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: |
| | 10°C to 35°C (50°F to 95°F) |
| | Non-operating Temperature: |
| | -40°C to 70°C (-40°F to 158°F) |
| | Operating Relative Humidity: |
| | 8% to 90% (non-condensing) |
| | Non-operating Relative Humidity: |
| | 5% to 95% (non-condensing) |
