+
+(1) 408-943-8000
My Cart 0

You have no items in your shopping cart.

Save 9%

Supermicro SuperServer SYS-1026GT-TF , 1U Barebone System, No CPU, No RAM, No HDD.

Intel® Xeon® processor 5600/5500  series, with QPI up to 6.4 GT/s, Up to 192GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM, 6x Hot-swap 2.5" SATA Drive Bays

.
SKU:

SYS-1026GT-TF

Weight:
40 lbs
Shipping:
Ships within 3-5 days
Price:

$1,171.20

$1,063.09

Availability In stock

FREE SHIPPING AVAILABLE

Overview

  • Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
  • Up to 192GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM
  • 1 (x4) PCI-E 2.0 (Low Profile)
  • Integrated IPMI 2.0 with KVM and Dedicated LAN
  • Intel® 82576 Dual-Port Gigabit Ethernet Controller
  • 6x Hot-swap 2.5" SATA Drive Bays
  • 1400W Gold-level High-efficiency Power Supply
  • 2x PCI-E 2.0 (x16) slots (1 on each side)

Technical Specification

Product SKUs
SYS-1026GT-TF
  • SuperServer 1026GT-TF (Black)
Motherboards
Super X8DTG-DF
Processor/Cache
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon®processor(s) of the same type below:
     
    • Intel® Xeon® Processor X5600/E5600/L5600 Series
      (Westmere) 40W - 95W

       
    • Intel® Xeon® Processor X5500/E5500/L5500 Series
      (Nehalem-EP) 38W - 95W
QPI
  • up to 6.4 GT/s
System Memory
Memory Capacity
  • 12x 240-pin DIMM slots
  • Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage
  • 1.5 V / 1.35V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Chipset
  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + IOH-36D
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® 82576 Dual-Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support for fast, scaleable, and reliable networking
  • VMDq support for better performance of virtualization
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW 8 MB DDR2
Super I/O
  • Winbond W83527HG chip
Clock Generator
  • 932S421 chip
Input / Output
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2 rear + 1 header (2 Ports)
  • 4 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA
  • 1x VGA Port
Serial Port
  • 1 Fast UART 16550 serial port
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-118G-1400B
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 28.2" (716mm)
Gross Weight
  • 38 lbs (17.2 kg)
Available Color
  • Black
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED / Fan fail LED /
    UID LED
Expansion Slots
PCI-Express
  • 1 (x4) PCI-E 2.0 (in x16 slot -Low Profile)
  • 2 (x16) PCI-E 2.0 (1 in each side)
  • AOC Compatibility Matrix
Drive Bays
Hot-swap
  • 6x 2.5" Hot-swap SATA drive bays
Backplane
SAS/SATA HDD Backplane
(SAS support requires optional SAS controller)
System Cooling
Fans
  • 8x 4cm heavy-duty counter-rotating PWM fans with optimal fan speed control
Power Supply
1400W high-efficiency power supply with PMBus
AC Input
  • 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
  • 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
DC Output
+5V standby
  • 4 Amp
DC Output
+12V
  • 100 Amp @ 100-140V
  • 117 Amp @ 180-240V
With Power Distributor
  • +5V: 14 Amp
CertificationGold Certified
  Gold Certified
  [ Test Report ]
PC Health Monitoring
CPU
  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
  • CPU Core 6-Phase-switching voltage regulator
FAN
  • Total of four 4-pin PWM fans
  • 4x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 4x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Power Fail / Overheat LED
  • Suspend-state Indicator LED
  • UID LED
Other Features
  • SDDC Support
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10° to 35° C (50° to 95°F)
  • Non-operating Temperature: -40° to 70° C (-40° to 158° F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)

Reviews

Write your own review

You're reviewing: Supermicro SuperServer SYS-1026GT-TF , 1U Barebone System, No CPU, No RAM, No HDD.

Customer Reviews

There are no reviews for this product yet.

Newsletter

Subscribe Now to get Saving Offers
Supermicro Partner