+
+(1) 408-943-8000
Save 17%
  •  Super B8DT6
  • SBI-7426T-S3

Supermicro SuperBlade SBI-7426T-S3, Blade Compute Node , No CPU, No RAM, No HDD.

Dual Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s, Up to 96GB VLP DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 24GB Unbuffered DIMM, 3x 2.5" Hot-Plug SAS/SATA Drive Trays
SKU:

SBI-7426T-S3

Weight:
9 lbs
Shipping:
Ships within 3-5 Days
Price:

$898.92

$749.10

Availability In stock

Call us for special price 408 895 5000 x 1
FREE SHIPPING AVAILABLE
End-of-Life - Please contact sales-rep for alternate SKU in same configuration.

Overview

Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s

Intel® 5500 (Tylersburg) Chipset

Up to 96GB VLP DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 24GB Unbuffered DIMM

Intel® 82576 Dual-Port Gigabit Ethernet 

LSI 2008 SAS2 Controller; RAID 0, 1; RAID 5 optional

Integrated IPMI2.0 w/ remote KVM and virtual media
3x 2.5" Hot-Plug SAS/SATA Drive Trays
Integrated Matrox G200eW Graphics

Technical Specification

Product SKUs 
SBI-7426T-S3Processor Blade SBI-7426T-S3 (Black)
Motherboard 
Super B8DT6 
Processor/Cache 
CPUDual 1366-pin LGA Sockets
 Supports up to two Intel® 64-bit Xeon®processor(s) of the same type below:
 Intel® Xeon® Processor X5600/E5600/L5600 Series
 (Westmere) 40W - 95W
 Intel® Xeon® Processor X5500/E5500/L5500 Series
 (Nehalem-EP) 38W - 95W
QPIup to 6.4 GT/s
System Memory 
Memory Capacity12x 240-pin DIMM slots
 Supports up to 96 GB VLP 1333 / 1066 / 800MHz DDR3 ECC Registered memory
 Supports up to 24 GB VLP 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
 Memory Mirroring supported
Memory Type1333 / 1066 / 800MHz VLP ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes1GB, 2GB, 4GB, 8GB
Memory Voltage1.5 V and 1.35 V
Error DetectionCorrects single-bit errors
 Detects double-bit errors (using ECC memory)
 Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 NOTE: 14-Blade can only use VLP (Very Low Profile) memory module.
On-Board Devices 
ChipsetIntel® 5500 (Tylersburg) chipset
 ICH10R + IOH-24D
InfiniBand Support4x DDR (20Gb/s) InfiniBand mezzanineHCA (Optional)
SASLSI SASII 2008
 RAID 0, 1 support
 (Optional: TSOC) RAID 5 support
IPMISupport for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM)
Network ControllersIntel® 82576 Dual-Port Gigabit Ethernet
 Intel® I/OAT 3 support for fast, scaleable, and reliable networking
 VMDq support for better performance of virtualization
Super I/OWinbond 83527HF chip
Clock GeneratorCK505 chip
System BIOS 
BIOS Type32Mb SPI Flash EEPROM with AMI® BIOS
BIOS FeaturesPlug and Play (PnP)
 PCI 2.2
 ACPI up to 3.0
 USB Keyboard support
Dimensions 
Height11.32" (288 mm)
Width1.19" (30.2 mm)
Depth18.9" (480mm)
Weight8.6 lbs (3.9 kg)
Available ColorsBlack
Front Panel 
ButtonsPower On/Off button
 KVM button
LEDsPower LED
 UID / KVM LED
 Network Activity LED
 Fault LED
ConnectorSUV (Serial/USB/Video) & KVM Connector
Drive Bays 
Hot-swap3x 2.5" SAS/SATA Hot-swap drive bays
Input / Output 
KVM1 Front Connector for Supermicro KVM Card
Operating Environment / Compliance 
Environmental Spec.Operating Temperature: 10°to 35°C (50°to 95°F)
 Non-operating Temperature: -40°to 70°C (-40°to 158°F)
 Operating Relative Humidity: 8% to 90% (non-condensing)
 Non-operating Relative Humidity: 5 to 95% (non-condensing)
Electromagnetic Compatibility (EMC) 
United States / CanadaFCC- Emissions (US) Verification
EuropeEN55022 - Emissions
 EN55024 - Immunity
 EN61000-3-2 - Harmonics
 EN61000-3-3 - Voltage Flicker
 CE - EMC Directive 89/336/EEC
Safety Compliance 
United States / CanadaUL60950-1 - CSA/CUL 60950-1
EuropeEN60950-1, CE - Low Voltage Directive 73/23/EEE
GermanyTUV

Reviews

Write your own review

You're reviewing: Supermicro SuperBlade SBI-7426T-S3, Blade Compute Node , No CPU, No RAM, No HDD.

Customer Reviews

There are no reviews for this product yet.

Supermicro Partner
[profiler]
Memory usage: real: 23330816, emalloc: 22790464
Code ProfilerTimeCntEmallocRealMem