Supermicro SuperServer 1028R-WTNRT, 1U Barebone System, No CPU, No RAM, No HDD

Product SKUs

SYS-1028R-WTNRT

SuperServer 1028R-WTNRT (Black)

Motherboard

Super X10DRW-NT

Processor/Cache

CPU

Intel® Xeon® processor E5-2600 v4†/v3 family (up to 145W TDP) *

Dual Socket R3 (LGA 2011)

Cores / Cache

Up to 22 Cores† / Up to 55MB† Cache

System Bus

QPI up to 9.6 GT/s

Note

* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.

System Memory

Memory Capacity

16x 288-pin DDR4 DIMM slots

Up to 2TB† ECC LRDIMM, 512GB ECC RDIMM

Memory Type

2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes

RDIMM: 32GB, 16GB, 8GB, 4GB

LRDIMM: 64GB, 32GB

Memory Voltage

1.2 V

Error Detection

Corrects single-bit errors

On-Board Devices

Chipset

Intel® C612 chipset

SATA

SATA3 (6Gbps); RAID 0, 1, 5, 10

IPMI

Support for Intelligent Platform Management Interface v.2.0

IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

ASPEED AST2400 BMC

Network Controllers

Intel® X540 Dual Port 10GBase-T

Virtual Machine Device Queues reduce I/O overhead

Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

1x Realtek RTL8211E PHY (dedicated IPMI)

Video

ASPEED AST2400 BMC

Input / Output

Serial ATA

8 SATA3 (6 Gbps) ports and 2 NVMe/SATA3 hybrid ports

LAN

2x RJ45 10GBase-T ports

1x RJ45 Dedicated IPMI LAN port

USB

2x USB 3.0 ports (front via header)

4x USB 2.0 ports (rear)

Video

1x VGA port

Serial Port / Header

1x Fast UART 16550 header

DOM

2x SuperDOM (Disk on Module) ports

PC Health Monitoring

Voltage

Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.

5+1 Phase-switching voltage regulator

FAN

6x 4-pin fan headers (up to 6 fans)

6x fans with tachometer monitoring

Status monitor for speed control

Pulse Width Modulated (PWM) fan connectors

Temperature

Monitoring for CPU and chassis environment

CPU thermal trip support

Thermal Control for 8x Fan Connectors

Thermal Monitor 2 (TM2) support

PECI

LED

CPU / System Overheat LED

Suspend static indicator LED

UID/Remote UID

Other Features

Chassis intrusion detection

Chassis intrusion header

SDDC Support

RoHS

Chassis

Form Factor

1U Rackmount

Model

CSE-116AC2-R706WB

Dimensions and Weight

Width

17.2" (437mm)

Height

1.7" (43mm)

Depth

23.5" (597mm)

Gross Weight

46 lbs (20.9kg)

Available Colors

Black

Front Panel

Buttons

Power On/Off button

UID button

LEDs

Power status LED

HDD activity LED

2x Network activity LEDs

Universal Information (UID) LED

Expansion Slots

PCI-Express

2x PCI-E 3.0 x16 full-height, half-length slots

Drive Bays

Hot-swap

8x SATA3 (6Gbps) ports and 2x NVMe/STAT3 hybrid ports (connected to onboard storage controller)

Backplane

SAS/SATA HDD Backplane

System Cooling

Fans

5x 4cm heavy-duty counter-rotating fans w/ air shroud and optimal fan speed control

Power Supply

700W/750W Redundant AC-DC high-efficiency power supply with PMBus and I2C

AC Voltage

700W: 100 - 140 V, 50-60 Hz

750W: 200 - 240V, 50-60 Hz

DC Output +5V standby

3 Amp

DC Output +12V

700W: 58 Amp @ 100-140V

750W: 62 Amp @ 200-240V

Certification

Platinum Level Certified  Platinum Certified

System BIOS

BIOS Type

128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features

Plug and Play (PnP)

APM 1.2

PCI 2.3

ACPI 1.0 / 2.0 / 3.0 / 4.0

USB Keyboard support

SMBIOS 2.7.1

UEFI 2.3.1

Management

Software

SuperDoctor® 5

Watch Dog

NMI

IPMI 2.0

Intel Node Manager

Power Configurations

ACPI / APM Power Management

Power-on mode for AC power recovery

Operating Environment / Compliance

RoHS

RoHS Compliant

Environmental Spec.

Operating Temperature: 10°C to 35°C (50°F to 95°F)

Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)

Operating Relative Humidity: 8% to 90% (non-condensing)

Non-operating Relative Humidity: 5% to 95% (non-condensing)