SuperMicro SuperServer SYS-2028U-E1CNR4T+ ,2U Barebone - Build to Order

Product SKUs

SYS-2028U-E1CNR4T+

• SuperServer 2028U-E1CNR4T+ (Black)

Motherboard

• Super X10DRU-i+

Processor/Cache

CPU

• Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP) *
• Dual Socket R3 (LGA 2011)

Cores / Cache

• Up to 22 Cores† / Up to 55MB† Cache

System Bus

• QPI up to 9.6 GT/s

Note

* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.

System Memory

Memory Capacity

• 24x 288-pin DDR4 DIMM slots
• Up to 3TB† ECC 3DS LRDIMM, RDIMM

Memory Type

• 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes

• 64GB, 32GB, 16GB, 8GB, 4GB

Memory Voltage

• 1.2 V

Error Detection

• Corrects single-bit errors

On-Board Devices

Chipset

• Intel® C612 chipset

SATA

• SATA3 (6Gbps) with RAID 0, 1, 5, 10

IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC

Network Connectivity

• 4x 10GBase-T ports

Graphics

• ASPEED AST2400 BMC

Input / Output

SAS

• 24x SAS3 ports support via expander and storage Add-on Cards
• One of the following storage Add-on cards required:
  
  AOC-S3108-H8iR (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3)
  
  AOC-S3008L-L8i (12Gbps SAS3/RAID 0,1 and 10, PCI-E Gen3)
  
  AOC-S3008L-L8e (12Gbps SAS3/HBA, PCI-E Gen3)

NVMe

• 4x NVMe ports

LAN

• 4x RJ45 10GBase-T LAN ports
• 1x RJ45 Dedicated IPMI LAN port

USB

• 5x USB 3.0 ports
  (2 rear, 2 onboard header, 1 Type A)

Video

• 1x VGA Connector

Serial Port / Header

• 1x Serial header

DOM

• 2x SuperDOM (Disk on Module) ports

System BIOS

BIOS Type

• 128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features

• Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1

Management

Software

• SuperDoctor® 5
• Intel® Node Manager 3.0
• Watch Dog
• NMI
• SMCBU and SMM
• Optional IPMI 1.5 / 2.0

Power Configurations

• ACPI Power Management
• Power-on mode for AC power recovery

Chassis

Form Factor

• 2U Rackmount

Model

• CSE-219UE1C4-R1K02

Dimensions and Weight

Width

• 17.2" (437mm)

Height

• 3.5" (89mm)

Depth

• 27.76" (705.3mm)

Weight

• Net Weight: 36 lbs (16.4 kg)
• Gross Weight: 72 lbs (32.7 kg)

Available Colors

• Black

Front Panel

Buttons

• Power On/Off button
• System Reset button

LEDs

• Power status LED
• HDD activity LED
• 2x Network activity LEDs
• System information (overheat/UID) LED

Expansion Slots

PCI-Express

• Up to 6x PCI-E 3.0 x8 slots 
  (4x FH, 10.5" L, 1x LP, 1x Internal LP)

(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

Drive Bays

Hot-swap

• 24x 2.5" Hot-swap drive bays
• Default 4x NVMe ports
• 24x SAS3 ports support via Expander and AOC

Note: Storage Add-on card is required

System Cooling

Fans

• 4x 8cm heavy duty PWM fans

Shroud

• 1x Air Shroud

Power Supply with Digital Switching Control

1000W Titanium Level (96%) High-efficiency Redundant Single Output Power Supplies

AC Input

• 100-127 V, 50-60 Hz
• 200-240 V, 50-60 Hz

+12V

• Max: 62.5A & Min: 0A (100Vac-127Vac)
• Max: 83A (200Vac-240Vac)

12V SB

• Max: 2.1A

Certification

    Titanium Level
    [ Test Report ]

PC Health Monitoring

Voltage

• Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
• 5+1 Phase-switching voltage regulator

FAN

• 8x 4-pin fan headers
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors

Temperature

• Support to monitor Supermicro AOC temperatures from IPMI or SD 5
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI

LED

• Memory DIMM ECC error LEDs
• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID

Other Features

• 4x 8-pin GPU power connectors
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
• RoHS

Operating Environment / Compliance

RoHS

RoHS Compliant

Environmental Spec.

• Operating Temperature: 
     10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: 
     -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 
     8% to 90% (non-condensing)

Non-operating Relative Humidity: 
   5% to 95% (non-condensing)