Supermicro SuperServer 5018R-MR, 1U Barebone System, No CPU, No RAM, No HDD

Product SKUs

SYS-5018R-MR

• SuperServer 5018R-MR (Black)

Motherboard

• Super X10SRi-F

Processor

CPU

• Intel® Xeon® processor E5-2600/1600v4†/ v3 family (up to 145W TDP **)
• Single Socket R3 (LGA 2011)

Core / Cache

• Up to 22 Cores† / Up to 55MB† Cache

Note

** Motherboard supports this maximum TDP. Please verify your system can thermally support

System Memory

Memory Capacity

• 8x 288-pin DDR4 DIMM slots
• Up to 512GB DDR4 ECC LRDIMM
• Up to 256GB DDR4 ECC RDIMM

Memory Type

• 2400†/2133/1866/1600/1333MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM/LRDIMM) / 284-pin gold-plated DIMMs

DIMM Sizes

• RDIMM: 32GB, 16GB, 8GB, 4GB

Memory Voltage

• 1.2 V

Error Detection

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset

• Intel® C612 chipset

SATA

• SATA3 (6Gbps) via C612 controller
• RAID 0, 1, 10 support; 5 supported under Windows

IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC

Network Controllers

• Intel® i350-AM2 Dual Port Gigabit Ethernet
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8201N PHY (dedicated IPMI)

Video

• ASPEED AST2400 BMC

Input / Output

SATA

• 10x SATA3 (6Gbps) ports

LAN

• 2x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port

USB

• 2x USB 3.0 ports (2 rear)
• 4x USB 2.0 ports (2 rear + 2 front)

Video

• 1x VGA port

Serial Port / Header

• 1x Fast UART 16550 serial port
• 1x internal header

DOM

• 2x SuperDOM (Disk on Module) ports

PC Health Monitoring

Voltage

• Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.

FAN

• Total of 6 fan headers supporting up to 6 fans
• 6 fans with tachometer status monitoring
• Status monitor for speed control
• Status monitor for on/off control
• Low noise fan speed control
• Pulse Width Modulated (PWM) fan connectors

Temperature

• Monitoring for CPU and chassis environment
• CPU thermal trip support
• I²C temperature sensing logic
• Thermal Monitor 2 (TM2) support
• PECI

LED

• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID

Other Features

• Chassis intrusion detection
• Chassis intrusion header
• Chipkill support
• RoHS, Halogen Free

Chassis

Form Factor

• 1U Rackmount

Model

• CSE-813MTQ-R400CB

Dimensions and Weight

Height

• 1.7" (43mm)

Width

• 17.2" (437mm)

Depth

• 19.85" (503mm)

Package

• 8" (H) x 24" (W) x 28" (D)

Weight

• Gross Weight: 31.4 lbs (14.3 kg)
• Net Weight: 18.6 lbs (8.5 kg)

Available Colors

• Black

Front Panel

Buttons

• Power On/Off button
• System Reset button

LEDs

• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED

Expansion Slots

PCI-Express

• 1x PCI-E 3.0 x16 slot

Drive Bays

Hot-swap

• 4x 3.5" Hot-swap drive bays

Peripheral Drives

Optional

• Optional slim optical device bay,
  optional FDD/USB bay
• 2x 2.5" Fixed drives internal

Backplane

SAS/SATA HDD Backplane
(SAS support requires optional SAS controller)

System Cooling

Fans

• 4x 40x28mm 4-pin PWM Cooling Fans

Power Supply

400W (1+1) Redundant SuperCompact Short-depth AC-DC Gold-level power supply with PMBus and I2C

AC Input

• 400W: 100-240 V, 50-60 Hz, 6-3 Amp

DC Output
+5V standby

• 3 Amp

DC Output
+12V

• 33 Amp

With Power Distributor

• +5V: 25 Amp
• +3.3V: 25 Amp
• -12V: 0.6 Amp

System BIOS

BIOS Type

• 8MB SPI Flash EEPROM with AMI BIOS

BIOS Features

• DMI 2.3
• PCI 2.3
• ACPI 1.0 / 2.0
• USB Keyboard support
• SMBIOS 2.3

Operating Environment / Compliance

RoHS

RoHS Compliant

Environmental Spec.

• Operating Temperature: 
     10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: 
     -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 
     8% to 90% (non-condensing)

Non-operating Relative Humidity: 
   5% to 95% (non-condensing)